Mini Microfibre Applicators – 4 Pieces

• Even application on small areas
• Saves coating with an internal absorption barrier
• Gentle 300 GSM microfibre

Apply protection precisely. Even in tight spaces.

Small areas. Full control. Narrow components and edges need precise handling. The Mini Applicator lets you position it accurately and helps spread coating evenly in these areas too.

An absorption barrier in the compact format too. The internal barrier limits product soaking into the foam core. Product stays available in the outer microfibre for application, a practical benefit when using small, carefully measured amounts.

Soft 300 GSM microfibre for gentle contact. Fine fibres spread compatible coatings and waxes without vigorous rubbing. A thoughtfully designed tool for professional paint care, with four fresh applicators per pack.

What does the absorption barrier do?

The internal barrier limits product soaking into the foam core. Your detailing product stays available in the outer microfibre instead of unnecessarily saturating the core, helping you spread coating or wax with control.

The microfibre itself absorbs product; this is intentional for application. Start with a small amount and add more as needed. Always follow your coating's application instructions.

What is the Mini format suitable for?

9 × 4 × 3.5 cm, with soft 300 GSM microfibre made from 80% polyester and 20% polyamide. The narrow format gives precise control around edges, contours and smaller components. Useful where a broad contact area is awkward to handle.

For manual application of compatible ceramic and graphene coatings, waxes and care products. Thoroughly clean the surface first and prepare it as the product requires.

1 pack contains 4 applicators; 5 packs contain 20 applicators. For larger painted panels, choose the large Microfibre Applicator.

Can I reuse the applicators?

After applying a curing coating, discard the applicator once that application is complete. Coating can harden in the fibres. These residues must not come into contact with paintwork again.

For non-curing care products, reuse is possible after thorough cleaning: wash at up to 30 °C without fabric softener and air dry completely. Check for hardened areas and particles before reuse. Use separate applicators for different products.

Never reuse an applicator containing cured coating on paintwork. Use a separate clean sponge for each product.