Ceramic coating for demanding vehicle detailing and long-lasting paint protection.
*Depending on preparation, processing, use, and maintenance.
Inkl. moms.
Leveranstid: 2–4 arbetsdagar · Italien
Guideline value: approx. 35 ml for the paint surfaces of a Golf-class car.
50 ml: Generally sufficient for a Golf-class passenger car.
100 ml: For larger vehicles, additional suitable surfaces, or multiple vehicles.
Consumption depends on the surface area, applicator, and amount applied. Plan for a little extra for large vehicles.
Suitable for: Automotive paints, painted rims, as well as suitable vehicle wraps and plastics.
Matte paints and wraps: Test on an inconspicuous area beforehand to ensure the surface appearance remains unchanged. If in doubt, consult with us before application.
Not for glass or soft rubber seals. Always test for compatibility on an inconspicuous area before each use.
Work at 15–25 °C on cool, dry surfaces. Ensure good lighting and ventilation, wear protective equipment, and test for compatibility.
Preparation: Clean the surface, remove any adhesive residues, and always polish glossy finishes—even on new cars, use at least a finish polish. Degrease completely; work in a dry and dust-free environment.
Application: Apply a small amount of product to the applicator; start with a maximum area of approx. 60 × 60 cm. After about 3 minutes, wipe off with soft microfiber cloths without applying pressure.
Inspection: Check for coating residue from several light angles. Wipe away any fresh high spots lightly no later than 10 minutes after application.
Curing: 12 hours until water-resistant and ready to drive; 5 days until fully cured. Guidelines based on approx. 20 °C, dependent on climate. Keep dry and protected until water-resistant; do not wash for 5 days. Carefully remove bird droppings and heavy contamination with a gentle stream of water or a very soft microfiber cloth.
View application steps →First time using ceramic?
With careful preparation, good lighting, and protected curing, getting started is manageable. Our video and instructions walk you through the process; our technical support is available if you have questions.
Does a new car need to be polished?
Even on new vehicles, the paintwork is usually not in optimal condition. Glossy paint should therefore always be prepped with at least a finishing polish and then completely degreased.
What is included?
Final PRO in your chosen size, the product box, and 2 coating certificates to document the vehicle sealant. Degreaser, applicators, and cloths are available separately or as a set.
How long does the sealant last?
Up to 3 years under the right conditions – this is not a blanket guarantee. Preparation, application, usage, and maintenance influence the durability. Wash regularly and remove heavy dirt promptly.
Made in Germany · Free from PTFE & PFAS
Application instructions (PDF) ↗ Safety data sheet (PDF) ↗ View the full test report ↗
Safety information
Final PRO in preparation
One layer, applied in sections and easy to remove. Final PRO combines pleasant application with a professional result, noticeable smoothness, and strong water beading.
Documented inspection
Final PRO was artificially weathered in the laboratory of DEKRA Automobil GmbH in Bretten. Subsequently, the appearance and adhesion of the coating, among other things, were evaluated.
Open test report
Artificial weathering in a hot, dry climate. No visible cracking on the tested samples.
No coating delamination in the cross-cut test after weathering.
Processing
Work at 15–25 °C on cool, dry surfaces. Read the instructions and safety information beforehand.
Clean thoroughly, polish glossy paints, and then degrease completely.
Apply in sections. Remove with soft microfiber cloths after about 3 minutes.
Check for coating residues and allow to cure in a protected environment.
12 hours until water-resistant and ready to drive ·
5 days until fully cured
Guideline values at approx. 20 °C, depending on climatic conditions. Keep dry until water-resistant; do not wash for the first 5 days.
