Inkl. moms.
Leveranstid: 2–4 arbetsdagar · Italien
Absorb the water before it evaporates on the paintwork. Otherwise, dissolved minerals can leave visible water spots and limescale marks, even on ceramic-coated vehicles. Rinse thoroughly after washing, work in the shade and dry straight away.
70/30 means 70% polyester and 30% polyamide. Combined with 1600 GSM and twisted-loop fibres, this special blend delivers high water absorption with a soft touch on paintwork. Lay the clean, dry towel flat and gently draw it across the surface. Pick up remaining drops around mirrors, trims and edges afterwards. Suitable for clean paintwork, glass, vehicle wraps and plastic; it does not remove existing mineral spots.
One towel is intended for a compact car roughly the size of a Golf. Coverage depends on vehicle size and how much water remains. For larger vehicles or substantial remaining water, keep a second towel ready.
Depending on your selection, you receive 1 or 2 towels, each measuring 80 × 50 cm. The size covers plenty of surface while remaining easy to control. Hold the lower end when drying doors and side panels so it cannot touch the ground.
Lay it on clean and dry, then draw it across without pressure. Thoroughly wash and rinse the vehicle first. Work in the shade on cool surfaces, starting at the top and keeping the towel under control. There is no need to wet it first. Switch to a fresh towel when it stops absorbing effectively.
Wash at up to 40 °C without fabric softener. Wash before first use. Keep it separate from heavily soiled polishing, wheel and coating cloths. After use, spread it out in a well-ventilated place and allow to dry completely. Do not fold it away damp.
Check for particles before every use. Clean thoroughly after contact with the ground. Find more advice in our guide to washing microfibre cloths.
Extremely absorbent microfibre for the final wash stage
Freshly washed, then covered in drying marks? As water evaporates on paintwork, mineral deposits can spoil the result. Our drying towel absorbs the droplets before they dry, helping you finish the wash with a clear, well-cared-for appearance.
1600 GSM. 70/30 microfibre. Outstanding water absorption. Our special fibre blend consists of 70% polyester and 30% polyamide. The fine twisted-loop fibres absorb plenty of water and feel soft against paintwork. Gently draw the towel over the wet surface instead of rubbing repeatedly. Its 1600 g/m² fabric weight and fibre structure make it a highly effective vehicle drying tool.
Streak-free drying without vigorous buffing. Use a clean, dry towel on cool paintwork and change it when saturated. Make the most of its absorbency for an even result: straightforward for your first hand wash and dependable for regular car care.
Wash the vehicle with shampoo and rinse completely. Work in the shade. Check the clean towel for particles.
Lay it on the wet paintwork and gently draw it from top to bottom. Keep it off the ground when drying the sides; switch towels when saturated.
Check for and absorb remaining droplets. Clean the towel after use and spread it out to dry completely.
The towel absorbs water, not coarse dirt. Only use on thoroughly cleaned surfaces. If it touches the ground, stop using it on paintwork until cleaned.
