Product Description

Application Area: Remove light scratches, prepare lightly weathered paint, prepare for subsequent waxing or sealing, suitable for all common paint types

The Black One Polish, free of silicones, offers effortless application and impressive results. It is the middle of 3 polishing stages in our multifunctional "Expertline Polishing System." In addition to its use in the multi-stage polishing system, it also excels as a one-step polish.

Our One-Step & Medium Polish is the result of research and state-of-the-art formula development. It is precisely tuned to our Medium Polishing Sponge, ensuring optimal application and outstanding results.
Enriched with fine micro-abrasives, the polish is specially designed to efficiently remove light scratches while simultaneously giving the paint an intense shine.
The One-Step & Medium Polish is not only easy to apply and extend but also easy to wipe off the paint. Whether a beginner or a professional, you will appreciate the ease of use and the impressive results.

Since our polish does not contain silicones, it is even ideal for subsequent painting work and various paint care processes (e.g., sealing or waxing).

Always pay attention to all instructions during processing

Container Sizes: 250ml, 1 Liter

Application of the One-Step & Medium Polish

Suitable for use in combination with rotary & orbital machines.
The following is the application as a One-Step Polish:*

Step 1:
Preparation:
Wash the vehicle thoroughly to remove all dirt. Clay the paint to remove adhered contaminants, thus extending the life of the polishing pads and preventing scratches from loosened dirt in the paint. Choose a clean and dust-free work area in the shade.

Step 2:
Process the Polish:
Mount a clean One-Step / Medium polishing pad on your polishing machine and apply a small amount of polish to the pad. Always work on small & manageable sections. (e.g., half a door or about a quarter of the hood). Wipe off the polished polish residues with a soft microfiber cloth.

Step 3:
Inspection & Next Steps:
Once you have processed all areas, check the entire vehicle again for possible streaks or areas with polish residues. Then you can treat the paint with a sealant or wax- pay attention to the corresponding instructions of the used products. Even though the Black-One Polish is silicone-free, the surface must be degreased especially before ceramic sealing. This can be best done with our Ultra-Degreaser.

When used as a Medium Polish in a multi-stage polishing process: Use the polish after the grinding polishing step and/or before the finish polishing step.

*This guide serves only as a rough guide, note that the application possibilities are very versatile and the exact procedure may vary depending on the application. If you are unsure about something, feel free to ask us for advice. Do not use in direct sunlight or on hot surfaces!

Processing Temperature: +5 to +30°C
Storage Temperature & Location: +5 to +20°C | Store protected from sunlight.
Shelf Life: At least 12 months in the original container.

Questions & Answers

How do I remove polish residues from the polishing pad?
We recommend blowing out the pads with compressed air during polishing (if available). This effectively removes most excess polish residues. After polishing, you can clean your polishing pads with lukewarm water and a drop of pH-neutral soap to remove the polish.

The polish dries extremely hard and is difficult to wipe off with a microfiber cloth, what's the mistake?
This is usually due to a heat issue, reduce the speed of your polishing machine and pay attention to the heat development that occurs on the surface during polishing- this should always be kept as low as possible. If the problem persists, use a fresh polishing pad.

I have polish residues dried in the paint, which I only noticed later?
Moisten a soft microfiber cloth, this will help remove the polish residues
Can I use the polish with other polishing pads than the medium pad?
Yes- depending on the hardness of the paint, type of paint, used polishing machine, etc., it may be useful to try other pad+polish combinations.

Regulation (EC) No. 1272/2008 The mixture is not classified as dangerous according to Regulation (EC) No. 1272/2008.
Hazard-determining components for labeling The treated goods contain biocide products as a protective agent. P102 Keep out of reach of children. Safety notes EUH208 Contains a mixture of 5-Chloro-2-methyl-2H-isothiazol-3-one (EC No. 247-500-7) and 2-Methyl-2H-isothiazol-3-one (EC No. 220-239-6) (3:1). May cause allergic reactions.
Safety data sheet available on request.