Entdecke mit unserer "Perfect Finish Anti-Hologramm Politur" das Erlebnis eines makellosen Lack Finishs!
Die speziell entwickelte Rezeptur ist dein Schlüssel zu einem unvergleichlichen Tiefenglanz, während sie gleichzeitig jegliche Hologramme effektiv entfernt. Nach der Anwendung lässt sich die Politur besonders leicht vom Lack abnehmen, was nicht nur Zeit spart, sondern auch ein strahlendes und gleichmäßiges Finish sichert.
Für maximale Ergebnisse lies dir bitte auch die Punkte "Verarbeitung" sowie "Tipps & Hinweise" genau durch- viel Spaß!
Usage area:Remove holograms, remove fine scratches, remove "wash scratches," preparation for applying wax or sealant afterward - suitable for all common types of paint
Die hochmoderne Perfect Finish wurde von uns entwickelt, um dir ein außergewöhnliches Hochglanz-Erlebnis zu bieten. Sie ist die feinste Politur in unserem 3 Stufigen Poliersystem und der Schlüssel zu einem tiefen, beeindruckenden Glanz sowie einer hologrammfreien Oberfläche.
This polishing paste was developed, among other things, to effectively remove stubborn holograms. It ensures that the paint not only shines to the maximum but also achieves a uniform, flawless finish that impresses from every angle.
We know that good workmanship is just as important as a good result. That is why the Perfect Finish Polish was also developed with an almost dust-free formula, allowing for a cleaner, hassle-free application.
After polishing, our Anti-Hologram Polish can be easily removed from the paint. This saves time and effort and ensures a radiant, even result without the risk of rubbing new streaks into the paint by wiping too hard. With the Perfect Finish Anti-Hologram Polish, the paint becomes a glossy masterpiece, free of fine imperfections.
Always observe all instructions during processing
Packaging sizes: 250ml, 1 liter
Suitable for use in combination with rotary & eccentric machines.
The following explains the application steps in more detail:*Step 1:
Preparation:Wash the vehicle thoroughly to remove all dirt. Knead the paint to remove stubborn contaminants; this not only extends the lifespan of the polishing pads but also prevents scratches caused by loosened dirt in the paint. Choose a clean, dust-free workspace in the shade whenever possible.
Step 2:
Processing polish:Stretch a clean Perfect Finish or Ultra Soft Pad onto your polishing machine and apply a small amount of polish to the pad. Always work on small & manageable sections. (e.g., half a door or about a maximum of a quarter of the hood). Remove the polished polish residues with a soft microfiber cloth.
On very sensitive paints such as solid black or very soft paints, you can use the perfect finish with our special Ultra-Soft Pads – in this combination, an absolutely hologram-free ultra-high gloss result is almost guaranteed.
Step 3:
Control & Next Steps:Once you have worked on all areas, check the entire vehicle again for possible streaks or spots with polishing residues. Afterwards, you can treat the paint with a sealant or wax – be sure to follow the relevant instructions and preparation guidelines of the respective products.
*This guide serves only as a rough outline; please note that the possible applications are very diverse and the exact procedure may vary depending on the use. If you are unsure about anything, feel free to ask us for advice. Do not use in direct sunlight or on hot surfaces!
Processing temperature:+5 to +30°C
Storage temperature & location:+5 to +20°C | Store in a shaded place.
Durability:At least 12 months in the original container.
Questions & AnswersWie entferne ich Politur Reste aus dem Polier-Pad?
We recommend blowing out the pads with compressed air (if available) during polishing. This effectively removes most of the excess polishing residue. After polishing, you can clean your polishing pads with lukewarm water and a splash of pH-neutral soap to remove the polish.The polish dries hard and is difficult to wipe off with the microfiber cloth, where is the mistake?
This is usually due to a heat issue; reduce the speed of your polishing machine and pay attention to the heat generated on the surface during polishing – it should always be kept as low as possible. If the problem persists, use a fresh polishing pad.I have polish residue dried into the paint, which I only noticed later?
Moisten a soft microfiber cloth to remove the polish residueCan I use the polish with polishing pads other than the Perfect Finish and Ultra Soft Pads?
Yes - depending on the paint hardness, type of paint, polishing machine used, etc., it can make sense to try the polish with different pads.